Fanatec ClubSport Pedals V3 Inverted
Pure realism.
Realism to the max – that’s the ideology of these inverted pedals. Pivot points, arrangement, distances and overall feeling, just like in a real car!
Original price was: $1,049.99.$799.99Current price is: $799.99. CAD
Description
Pure realism.
Realism to the max – that’s the ideology of these inverted pedals. Pivot points, arrangement, distances and overall feeling, just like in a real car!
Inverted clutch and brake.
The clutch and brake pivot points are inverted to the upper side of the pedals, attached to a very solid frame, just like you would expect from the Fanatec ClubSport Series. The longer pedal travels and the pedal distances are inspired by real cars in every detail.
Brake pedal equipped with adjustable damper.
Proven Design.
Full metal construction with cutting-edge features, just like the ClubSport Pedals V3 and its predecessors.
Smooth operator.
By splitting the rotor into offset segments, cogging torque is naturally reduced. Combined with our patented FluxBarrier technology which increases efficiency and smoothness, the result is crystal-clear force feedback information in every driving situation.
Consistent torque, lap after lap.
Engineered to meet strict cooling requirements, the ClubSport DD+ is the most thermally stable Wheel Base in its class, so you can have absolute confidence that the torque output and force feedback will remain consistent, no matter how long you drive.
Features
- Turning points of brake and clutch on top side like in real cars
- High resolution pedals with magnetic and contactless sensors on gas and clutch for a long life and maximum performance
- Pressure sensitive brake with custom made 90 kg load cell sensor
- Adjustable brake stiffness and travel without tools
- 12-bit resolution (4096 values) on all axis
- Alternative D-shape race plates in curved design
- Pedal extension to adjust the angle of the pedal plate and to change the angle of the whole pedal arm
- Brake sensitivity can be adjusted through the Tuning Menu of the wheel and during the race
- Vibration motor on throttle pedal indicates rear wheel spin and oversteer (control by games is possible via Fanatec Wheel SDK)
- Vibration motor on brake pedal to simulate ABS and indicate locking tires (controlled by Fanatec wheels: Compatible to all games. Dynamic control by games is possible via Fanatec Wheel SDK)
- Design of the gas pedal allows quick exchange of the springs. Two springs of different strengths are included
- Damper Kit assembled out-of-box on brake pedal, optional damper kit for gas sold separately. The hyraulic dampening resistance can easily be adjusted with a knob
- Full multiplatform compatibility, depending solely on the platform compatibilities of the connected Wheel Base/Racing Wheel
- Full metal construction of CNC-machined aluminium
- Ultimate adjustability: Position of pedal plates in all directions, angle, spring strength at throttle, brake sensitivity, brake travel
- Compatible with the Colour Kits to allow visual customisation (Note: Colour Kit footrest is shorter than standard V3i footrest!)
Compatibility
Platform Compatibility
- PC:
- If you connect it to a Fanatec Wheel Base / Racing Wheel, it will be compatible to all racing games. For more information, check the compatibility details on the product page of the connected product.
- It will work with any racing wheel, also of any other brand (Logitech, Thrustmaster, etc), if the pedals are connected to PC via USB and if the game supports a second controller. These PC games support a second USB controller:
- iRacing
- Assetto Corsa
- Project Cars
- GTR 2
- Race 07
- rFactor
- Live for Speed
- …and many others
- Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Further information can be found on the Fanatec Wheel Base / Racing Wheel product pages. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter.
Peripheral Compatibility
- Compatible with any Fanatec Wheel Base or Fanatec Racing Wheel with RJ12 Pedals connector. To connect Fanatec Wheels with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable.
- Compatible with ClubSport Pedals V3 Brake Performance Kit
- Compatible with ClubSport Pedals V3 Damper Kit (Throttle Pedal)
- Dedicated plug for the ClubSport Handbrake
- The pedals are not compatible with the ClubSport USB Adapter. Please use the included USB connector (PC only).
Tech Specs
Product Series
ClupSport
Weight Unit of Measurement
KG
Platform
PC, PlayStation Ready, Xbox Ready
Weight
10.52
What's Included
- ClubSport Pedals V3 inverted
- ClubSport Pedals V3i Damper Kit (pre-assembled on brake pedal)
- 3x Pedal Extensions (2x assembled, 1x accessory)
- 3x D-shape pedal plates incl. mounting screws
- 1x Strong spring throttle
- 2x Stabilizer feet incl. mounting screws
- 1x RJ12 connection cable (150cm)
- 1x USB connection cable (180cm)
- 1x Allen Key for damper
- 1x Lithium grease bottle
- 1x Quick Guide
Special Notes
- Please note that the vibration function on gas and brake is not supported by all games. On PC it can be implemented with plugins to our driver / third party software if the games sends the telemetry data.
- Max resolution depends on the connection:
- through PWT / PWTS / CSR / CSR Elite wheel: 8-bit (256 values) on all axes
- through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E WB+ / CSL E WB V1.1 / CSL E RW PS4: 12 bit (4096 values) / P WB DD1 & DD2 on all axes
- USB direct connection (PC): 12-bit (4096 values) on all axes
Additional information
| Weight | 11 kg |
|---|---|
| Dimensions | 50 × 40 × 34 cm |
- We try to provide most accurate and up-to-date information on the products that we carry. However it may have errors and/or missing information. Please contact us for more detailed and up-to-date information.
You must be logged in to post a review.
Customer Reviews
There are no reviews yet.